The reason for the sudden stop of the sand making machine

Project Background

Blockage of the material can also cause sudden stop of the equipment. At this time, the material should be cleaned up. In the subsequent use, materials with large particle size or high water content are prohibited from entering the machine

What are the specific matters of maintenance and maintenance of ultrafine grinding machine?Jaw Crusher Operation PrecautionsNoise problem of jaw crusher in quarry

If you have any questions about mining & construction, please contact us

Get Price

The reason for the sudden stop of the sand making machine

Blockage of the material can also cause sudden stop of the equipment. At this time, the material should be cleaned up. In the subsequent use, materials with large particle size or high water content are prohibited from entering the machine, and the feeding material should be kept uniform to avoid excessive feeding.

62eab306d7434c958cdea28b126d8b8f.jpg

Check if it is a problem with the V-belt. If it is too loose and cause downtime, adjust the tightness of the V-belt. If the V-belt loses its tightness due to long-term use, replace the V-belt.

When the working voltage of the production site is too low, it is not enough to stop the normal operation of the sand making machine. In this case, select the voltage that meets the requirements of the device.

If the equipment has a metal touch before the machine is stopped, it may be that some parts in the crushing chamber fall and the sand making machine suddenly stops. At this time, the internal inspection of the equipment is required.

When the inside of the crusher enters a hard object such as metal, it is possible to jam the impeller of the sand making machine, resulting in the equipment not working, so it is necessary to strictly control the hardness of the material and prohibit the entry of unbreakable objects.

微信图片_20190924152655.gif

If it is caused by a broken spindle, repair or replace the worn spindle. If it is caused by bearing lock, it is necessary to find out the cause of the lock, to correctly install the bearing, to ensure that the bearing has a certain working clearance, and to do the lubrication of the bearing, otherwise the problem cannot be solved fundamentally.

If the connecting line breaks or is in poor contact, the sand making machine will suddenly stop, especially if there is no sound without warning, it is likely that there is a problem with the connecting line.

The above seven reasons are more common situations in which the sand machine suddenly stops. The next time you encounter it, you may want to check these aspects first to avoid unnecessary cost waste.

Equipment Configuration

Other Case